Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Heater Fan Motor 200 1986

posted by  Ezra on  Sun Jan 25 08:00 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 11 15:14 CST 2014
[RELATED]

After following the Bentley instructions, lots of cursing and a few innovations of my own I have finally removed the two ends of the heater cowls and have access to both ends of the blower. The motor/fan seems all afloat, I assume it should not be this way, right??. Bentley says the next thing to do is remove the blowers. Anybody have any ideas how to do this without destroying the plastic blower units?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Heater Fan Motor [200][1986]
posted by  Ezra  on Sun Jan 25 08:00 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.