Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Determining Which Wire Harness 200 1983

posted by  VolvoKurt on  Fri Jan 16 05:19 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu May 29 08:32 CST 2008
[RELATED]

I have a 1983 GL. I have found a wiring harness locally, I think. But looking at the Dave Barton site (where this harness apparently came from), there are two possible ignition wiring harness; one with a round and one with a rectangular connector. What does that connector connect to? How do I know which one I need before taking my old one off? My local source says that because I have an ECU on my passenger side it will definitely be the same as the one he has-that it is the Chrysler ignition. But the distributor cap I took off and replaced was the red-orange color (but I put on a greyish Borg Warner cap that fits and works).

Related question: is replacing an ignition wiring harness something I can and should do myself? Or hire it done for an hour of shop time?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Determining Which Wire Harness [200][1983]
posted by  VolvoKurt  on Fri Jan 16 05:19 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.