Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2006 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B18 jetting advice 120-130

posted by  hans on  Tue Jan 13 11:52 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 19 15:26 CST 2014
[RELATED]

Firstly let me commend the regular contributors and everyone else on some fantastic threads lately, very informative to someone in the process of building a big bore B20
In the meantime I recently bought a very nice 66 121 that has been fitted with a new D cam and followers and twin SU HS6, when I got it, it had a huge flat spot at lower revs, I replaced the RL needles with some SM's I had, put a 2 inch exhaust on , 1 muffler, and advanced the timing a bit, that made a big improvement, the engine has lots of power ( well enough for how I use this car ) at higher revs but still not much midrange power, the carbs have been rebuilt and are sound, the engine is low mileage and feels very sound.
Are there some more suitable needles? any other possibilities?
Or do i just put in a B20?
Thanks
Hans





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B18 jetting advice [120-130]
posted by  hans  on Tue Jan 13 11:52 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.