Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing Hall Sender in Bosch Distributor 200 1987

posted by  powellrb on  Mon Dec 29 13:44 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jul 1 11:09 CST 2014
[RELATED]

Trying to replace the Hall sender in the above distributor. Distributor is out of the car, on the workbench. New sender is in hand. Looking at the Bently manual for replacing the sender and on page 280-14, fig. 30 it shows that you have to remove the trigger wheel circlip to get to the Hall sender. I'm stumped - I don't see any splits or anything else to be able to spread said circlip to remove it. Anybody done this and "broken the code"? Any insight would be greatly appreciated.
TIA,
Randy
--
RP '87 245 (Ol' Blue)281,000 mi, '93 245 (Ruby)153,000 mi, '02 BMW 325, '98 Mustang Cobra, '87 Harley Heritage, and on order - 2003 Anniversary Edition Corvette Convertible :)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacing Hall Sender in Bosch Distributor [200][1987]
posted by  powellrb  on Mon Dec 29 13:44 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.