Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

89/740/16valve specs/Head problems 700 1987

posted by  rsjones on  Mon Dec 22 17:58 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Apr 3 17:15 CST 2014
[RELATED]

Ok the valve were bent on the head. I had that fixed. My Question is the torq specs for the head. Mitchell says to torq to 29lbs then turn 115 deg.with a ratchets . What does that work out to on torq wrench. Also Rtv sealer on the cam carrier to the head, how much and is there any caution on this. All help is wanted. I've allready got the block on #1 Thanks for the help.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 89/740/16valve specs/Head problems [700][1987]
posted by  rsjones  on Mon Dec 22 17:58 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.