Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

engine quits when high beams on 700

uid 7678's pic
posted by  Yvan Lacroix on  Fri Dec 12 16:33 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 3 13:45 CST 2014
[RELATED]

I just purchased a 89 740t(bosch) that has been converted to na. When I put, or flash) the high beams on it quits , and restarts only when the lights are returned to low beam. I once looked at a car that had the same problem a few years ago, is this common? Can anyone direct me in the direction of the problem(I assume it's a bad ground)BTW it still has the balast resistors for the injectors ant the under hood layout is like a 740 t (battery on drivers side, still uses the intercooler, but has a b230f out of a 86 740)

Thank You
--
65 122s/73 1800es/80 262c(350ci v8)/89 745t/87 780/89 240/89 740t/ 87 740






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New engine quits when high beams on [700]
posted by  Yvan Lacroix  on Fri Dec 12 16:33 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.