Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2019 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

HEATER HOSES 700 1987

posted by  VOLJO on  Wed Oct 29 17:21 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jun 7 11:50 CST 2014
[RELATED]

These are excerpts from the FAQ.

"[Pete Fluitman] Check the heater hoses, I have seen several 700's where they are swapped over and it results in ZERO heat. The one connected to the side of the block is the hot water feed. It goes to the TOP BULKHEAD OUTLET VIA THE HEATER VALVE. The hose connected to the metal pipe on the manifold is the return, it sucks the cold water out from the lower outlet."

"Install the new valve and tighten the clamps. [RMagoo] The valve goes between the heater hose connected to the short pipe coming out the cylinder head and the HEATER HOSE ENTERING THE BOTTOM TUBE of the firewall connector . The arrow on the valve points toward the firewall. The top heater hose goes to the red pipe behind the head leading to the water pump."

My question is which is correct? Is the heater valve connected to the top heater core outlet or the bottom heater core outlet?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New HEATER HOSES [700][1987]
posted by  VOLJO  on Wed Oct 29 17:21 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.