Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2021 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

replacing the oil line going into the turbo 200 1981

posted by  caseyorama on  Sat Sep 13 04:42 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jul 10 23:24 CST 2014
[RELATED]

OK, here's another one. The oil line to the turbo has a crack near the upper flange, In order to remove it, Do I have to remove that oil sensor-looking thing that is mounted to the block directly above it, or can I work around it, and what is it? will I need to order another gasket when I replace it?
The haynes manual devotes about ten pages to the engine and doesn't even have a picture of the right side.
Thanks ,
casey

Oh by the way, the engine is a 1981 b21 f in a 240






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New replacing the oil line going into the turbo [200][1981]
posted by  caseyorama  on Sat Sep 13 04:42 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.