Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Can't align E-codes...wacked??? Help!!! 200

uid 13259's pic
posted by  Sterndogg02 on  Thu Sep 4 14:22 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hey all, I've had my E-codes in for about two months now and I can't seem to get the beams aligned correctly even after attempting to adjust them via the knobs. No matter what they seem to be pointing away from the road and provide poor lighting (even with the brights). At first (before driving) I thought they were great but what is going on here?? I have PIAA bulbs and picked up the heavy duty wiring harness...took the car to my local Volvo guy to have him check them out and the wiring seemed fine. He mentioned something about the beam pattern on the glass...any suggestions?? They came from The Netherlands brand new, but do not say Volvo on them. Very difficult to see at night which should not be the case!!!!!
Thanks!
-Adam
--
'92 244GL silver-metallic, 146k, Bilstein HDs, IPD sways, upper+lower chassis braces, Cherry-Turbo strut brace, 240 OEM rear wing, 15" Draco Rims, Full E-code lighting w/side repeaters, Magnaflow 2.5" mandrel SS exhaust w/Unitek header (Jethot coated)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Can't align E-codes...wacked??? Help!!! [200]
posted by  Sterndogg02  on Thu Sep 4 14:22 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.