Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2020 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ignition Control 700

posted by  Tankdriver on  Mon Jul 28 15:16 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I just wanted to thank all the Brick Heads for some very useful info. I just had my 1989 740GL(non-Turbo) returned to me in great shape!! I had the problem that was referenced several times about the poor idle and the loss of power while driving. It turnied out to be the Ignition control module. After replacing may other parts(that needed to be replaced) we finally found the problem. I suggest going right o the ICM before spending the $$ I did.(no Comment) Also, if your brick is running rough and is sluggish, try replacing the Flame Trap. It is usually located under the intake manifold.
Again, Thank you for all the information, I will be sure to check the BRICKYARD for all my Volvo needs.
P.S. What's the best website for parts???






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Ignition Control [700]
posted by  Tankdriver  on Mon Jul 28 15:16 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.