Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

starting a motor w/o all the electrical aystem functioning 200 1986

posted by  red ryder on  Mon Jul 28 13:27 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu May 6 16:26 CST 2010
[RELATED]

i've attempted to 'prove' a engine that has not run in 6 years-----without using the cars fuel system. i've removed the in-tank and the main-fuel-pump fuses, 'made' a fuel system using a high-pressure fuel pump drawing from the gas can i use for the lawnmower [got fuel before the fuel rail and at the line-
pressure-regulator] if the response from my post-just-now advises that the
injectors are SUPER SENSITIVE AS TO FUEL PRESSURE i'll put an accessory line-
pressure-regulator-and-gauge-into-my contraption however MY PROBLEM IS THE ENGINE TURNS OVER, HAS GOOD SPARK YET WILL NOT FIRE AND RUN ON-IT'S
OWN! i have removed the plug beneath the cold-start-valve filled a pump oiler with gasoline, squirted a little gas---got the engine running----as
long as i continue to squirt gas from the oiler, that is.......when i removed #4 and #6 fuses
did i also DISABLE the electrical feed to the fuel injectors?
ANYONE HAVE A SUGGESTION?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New starting a motor w/o all the electrical aystem functioning [200][1986]
posted by  red ryder  on Mon Jul 28 13:27 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.