Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2013 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Power window woes - broken mounting plate 700 1986

posted by  darius on  Fri Jul 25 14:41 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 20 19:24 CST 2014
[RELATED]

My driver's side rear window stopped working and the glass was able to go up and down freely, so I decided to take the panel off and see what was happening. The white plastic mounting plate for the motor is cracked in several places and needs to be replaced. I know there is info on the FAQ about this, but I wondered if anyone has fixed this successfully and could offer me suggestions as to how to get the job done without going crazy? The whole area is virtually inaccessible (makes a flame trap, by comparison, look like it's on a broad highway) and I can't seem to figure out how to get the pieces out and then how to get them back in there. (A new door from a junkyard?)

Thank you all for your help!
--
Darius in Albany NY '86 744 GLE, '91 745T






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Power window woes - broken mounting plate [700][1986]
posted by  darius subscriber  on Fri Jul 25 14:41 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.