Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2020 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Transmission Mount Paranoia 200 1986

posted by  FactoryFive245 on  Mon Jul 21 17:03 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hey fellow brickboarders, My 245 is in need of a transmission mount, and I was wondering if there were any difficulties in replacing it. My brick has the 4 speed w/ overdrive manual. The reason I am asking this is because of my experience replacing my heater core. The haynes manual listed it as a simple 4-step procedure, and before I knew it, I was in for the time of my live taking things apart and putting things back together. Well, the same goes with the transmission mount, it is a 5 step procedure that involves "jacking the transmission up a bit, removing the old mount, installing the new mount, and securing all bolts." Is it really this easy? Or are there any tips you guys could give me to help me out?

Any help is greatly appreciated.
Andrew Gyger






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Transmission Mount Paranoia [200][1986]
posted by  FactoryFive245  on Mon Jul 21 17:03 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.