Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2003

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Knock sensor types and torques

uid 55's pic
posted by  john sargent on  Thu May 29 16:49 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 09:07 CST 2014
[RELATED]

There are two knock sensors used on the red engines. Type 1 is on the left in the photo below, and Type 2 is (obviously) on the right. Type 1 has the flat top, and the fastening bolt is torqued to 8 ft-lbs (11Nm), and Type 2 has the domed top and the fastening bolt is torqued to 15 ft-lbs (20Nm).





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Knock sensor types and torques
posted by  john sargent subscriber  on Thu May 29 16:49 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.