Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2001 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

installing boost gauge 700 1992

uid 1758's pic
posted by  blkberry on  Thu May 29 12:58 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed May 2 12:55 CST 2007
[RELATED]

Good evening BB'ers

I picked up an Issopro boost gauge. I want to install this in my wagon. I did a search here and got quite a bit of info. I just have a few questions on how the all connect.

1 On the back of the gauge the are two metal connectors up on top.I think one is power for the lighting and the other is the ground.Is this right?
2 Now there is also a brass threaded fitting with a little pin size hole in the middle.What is needed here?
3 I know you T off the existing tubing from the stock turbo gauge but do you just cut the tubing and install the tee fitting from the driver side engine compartment or from under the dash?
4 What size is the vacuum hose i need and how long should it be?
5 What are the supplies i will need to do this myself?
6 Did i forget anything? I can get all the supplies at my local autozone/pepboys right?

thanks for everyone's help.

Oh... I want to install the boost gauge first to see what the stock boost gauge is before i buy one of those g-valve/dawes device thingy.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New installing boost gauge [700][1992]
posted by  blkberry  on Thu May 29 12:58 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.