Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to mount Fuel pressure regulator ? 700 1989

posted by  runwld2 on  Thu May 29 04:12 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 30 13:11 CST 2014
[RELATED]

Having decided my the FPR on my 745 is bad, see other post, I removed it and replaced it with another from my 744, just to check if it helped (it didn't).

The question is, how the heck are you supposed to mount one of these.? On this car the FPR fits into a cup on the end of the fuel rail. no mounting bolt or clamp, just a very tight friction fit with an O ring suppying the seal. It is held in place by two bolts which hold it to a bracket positioned on the rail.
I could not forse this thing back in no how. I finally got two long bolts in place of the stock mounting bolts and by tightening them I got the FPR to almost seat in the cup, then used channel locks to force it the rest of the way.
Frankly I'm amazed it didn't leak as I was sure I could have destroyed thhe O ring with the force I was putting on it.
Anyone have experience here? I think this car has the LH 3.0 injection.
--
744-16v,745-16v,242Turbo.245DLT






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How to mount Fuel pressure regulator ? [700][1989]
posted by  runwld2 subscriber  on Thu May 29 04:12 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.