Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

AW-71 from 740 to 240? 200 1983

posted by  anderssj on  Wed Apr 30 07:31 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:03 CST 2014
[RELATED]

Hi All,

The project continues--although last week's "blistering" pace has slowed considerably as my son and I have returned to school and work, respectively.

I've come across a newer auto-box with many fewer (about 90k) miles than our current trans . . . but it's out of a 89 740 turbo. What parts will I need to change to make it fit our 83 244Ti? So far, I'm thinking I'll need to change the output-/tail-shaft, and maybe the gear selection lever. Oh, probably the rear mount too. According to my parts man, the flex-plate appears to be the same . . . .

Anything else I should consider doing prior to the install (e.g., rear bushing/seal, selector lever seal(s), all those little plastic balls in the valve body . . . .)

As always, thanks in advance for any advice, BTDTs, etc.

Best Regards,

Steve A-





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AW-71 from 740 to 240? [200][1983]
posted by  anderssj subscriber  on Wed Apr 30 07:31 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.