Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

HAve a Volvo HA-3141 2x40W amp to install 200 1988

in the wifemobile. She likes 4 speakers, and the CR-4123 head unit does fine, as to High Fidelity - nothing exotic needed.

Needs the amp to power rear speakers. Got in on eBay, under $30. The wires are all there, and I can maybe figure out what goes where, but if you already know what goes where, it would help me a bunch.

Here's what wires are there, and my guess as to where they go.


Fat black cord with DIN connector ------------------------ into head unit jack.

Heavy gauge black with insulated male spade connector ----------- into a ground?

Heavy gauge yellow with insulated male round connector ---------- into the head unit power on? or to a constant power and the "on" signal comes elsewhere.


Six place connector, five are used with light gauge wires.

Pair #1 -- Black and white/black stripe --- to one rear speaker??

Pair #2 -- Black and uellow/black stripe ---- to the other rear speaker??

Single wire ---- just plain black --- to ground on the head unit frame?? Maybe the "on" signal??

The unit came out of a 1989 780.

The question marks are my guesses. Any help will be appreciated!!


Thanks in advance,

Bob

:>)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New HAve a Volvo HA-3141 2x40W amp to install [200][1988]
posted by  B.C. subscriber  on Wed Apr 23 08:48 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.