Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2022 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cruise add and starter problems 200 1981

posted by  old244 on  Tue Apr 22 08:07 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jan 17 02:44 CST 2008
[RELATED]

The frustration factor is getting higher...Any tips on the best method to get a 19mm socket on the upper bolt of the starter? I have a universal joint and 36" worth of extensions, but I can't seem to get the socket on the bolt. Also, I am trying to add cruise control onto the DL, but noticed that there don't seem to be any mount points in the firewall for the vacuum servo. Is that common, and if so, can I just drill a couple of mounting holes?

Thanks,
Jeff






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cruise add and starter problems [200][1981]
posted by  old244  on Tue Apr 22 08:07 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.