Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Brake Bleeding 200 1983

posted by  someone claiming to be Skip on  Wed Apr 16 09:42 CST 2003 [RELATED]

After replacing all brake components on my '83 240, I am having trouble bleeding the brakes completely, even with a power bleeder. Master cylinder, calipers, rotors, pads and flex lines were all replaced. Usually the pressure system works like a champ. I have heard there is a recommended sequence of bleeding the calipers that even covers which bleeder on the front calipers (inner, outer, top) Does anyone have the exact sequence? Thanks.

Skip
'93 850GLT
'89 765T
'83 242TI Flathood






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Brake Bleeding [200][1983]
posted by  someone claiming to be Skip  on Wed Apr 16 09:42 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.