Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

89 240DL -TOO RICH? 200 1989

posted by  Jack Popham on  Sun Apr 13 15:35 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have an 89,240DL,auto,145k, with LH-2.4 . I've been getting fault codes 231,113,221. I removed and cleaned the TB (dirty), cleaned and oiled the ACV, cleaned and greased electrical connectors,tested the resistance in the AMM wire and the OXS and replaced the FPR . Ran well-no codes for a few weeks until today. I beleive the car goes into limp mode(more like criple mode) and will stall if I don't keep the RPM's up. I changed the FRP after lurking here and thought I had it solved. I haven't got to the ECU system electrical tests in the Bentley Book. Are they conclusive? Could the AMM be bad if it passes a resistance test? Thank you for your help. -Jack






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 89 240DL -TOO RICH? [200][1989]
posted by  Jack Popham  on Sun Apr 13 15:35 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.