Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ScanTeck Pinion Seal...Opinions...over OEM? 200 1990

posted by  KarmaticLove on  Sat Apr 12 06:51 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Bricksters,
While I have had some bad ScanTeck experiences, especially with gaskets and seals, every on-line parts search I do for the pinion seal turns out to be a ScanTeck part. Even at an all OEM Volvo parts site, the pinion seal is not OEM! Any one have any bad experiences with this particular part from ScanTeck... I just noticed the tell tale drip (very slow/slight) as I went to change the gear oil today so I apparently have another project on my hands. In this case, I dont own a huge breaker bar so I'll get the seal and oil and take it to my Volvo guy. Thanks in advance, Jon






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ScanTeck Pinion Seal...Opinions...over OEM? [200][1990]
posted by  KarmaticLove  on Sat Apr 12 06:51 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.