Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

M46 Overdrive relay apart - what do I solder? 200

posted by  SLong on  Thu Apr 10 13:04 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 19:52 CST 2014
[RELATED]

I took the OD relay out of my 84 240 with a manual transmission (M46) and want to re-solder the connections as suggested. However, there are a lot of solder points. Which ones should I redo? Just to make sure that I have the right relay, its blue and about 1x1x3 inches. On the inside there is a small circuit with a chip. The part number 1 259 750 89 63 26. I don't have the Bentley manual yet.
Thanks,
-Steve
--
1986 745 w/ M46 200K since new, 1995 965 104K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M46 Overdrive relay apart - what do I solder? [200]
posted by  SLong  on Thu Apr 10 13:04 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.