Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2002

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

245 front windshield wiper drive arm cable eccentric lobe connection

posted by  ONLY240 on  Sun Mar 30 03:42 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jan 16 11:23 CST 2012
[RELATED]

In replacing the WW motor, my daughter moved the ww arms from the outside to resposition the stop location of the blades which caused the cable to come off the drive lobe of the passenger side internal drive eccentric lobe.

I had the glove box out to replace the motor but I am pulling my hair out to figure how to rethread the dirve arm cable on to the eccentric lobe. The cable has as small threaded nut at one end. Should this be removed to thread the cable and then reconnect?

How do you get access?

HELP. I am frustrated and have spent too many hours on this. Has anyone gone through this issue? Can you offer suggestions?

I would appreciate any help.

Thanks

Allan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 245 front windshield wiper drive arm cable eccentric lobe connection
posted by  ONLY240 subscriber  on Sun Mar 30 03:42 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.