Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Did I kill my hall sensor 200 1986

posted by  yrots on  Mon Feb 3 12:35 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Apr 12 11:19 CST 2014
[RELATED]

Changing rotor on distributor I broke the connector for the hall sensor. The wires seemed to be intact and the connector broke off a pc inside the distributor which held it in place and which I retrieved. Now fuel pump only works if I bypass the relay and I don't appear to have any spark when cranking.
I pulled the connector off and tested the three leads of the hall sensor. No voltage to red or blue lds and resistance does not register o ohms.
What should I try next?

Dirk






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Did I kill my hall sensor [200][1986]
posted by  yrots  on Mon Feb 3 12:35 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.