Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Are all Garrett turbos the same on Volvos? (pics) 200

posted by  Bob Wennerstrom on  Thu Jan 30 12:04 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jul 15 12:01 CST 2011
[RELATED]

I was trying to save some down time by rebuilding a Garrett off a '88 740 and dropping it in my '82 245 when I had the time. I ordered a center cartridge for the '82 assuming it would be the same as the '88. Well.. it's not, the mating surface on the intake side is different. I don't know if the supplier made a mistake or if it was me. I haven't disassembled the '82 yet as it's in my daily driver

Has anyone had their turbo apart and can remember what the mating surface from the cartridge to the intake housing looked like. My old one has an O-ring on a thick flange and the one I bought has a stepped flange with no O-ring. the flange on the new cart is also slightly too small for the housing. I've tried to attach pictures of the difference.

Thanks again,
Bob W.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Are all Garrett turbos the same on Volvos? (pics) [200]
posted by  Bob Wennerstrom subscriber  on Thu Jan 30 12:04 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.