Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Thanks to All... 200 1984

posted by  ChittyChittyBangBrick on  Tue Dec 31 06:47 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Thanks everyone for your help on debugging the O/D on my M46. As it happens, the solenoid is good and now cleaned, but it was the relay after all. The switch in the gear shift was sending the 12V to the O/D socket behind the glove box. I am however, putting my own latching switch in, that I have made and it is twenty times more reliable than the electrical-engineer-gone-giddy design in the tap circuit relay that is OEM. The only hitch is I have to remember to manually disengage it when I leave 4th. Not a biggie. Kinda nice actually.

Many thanks again, and Happy New Year.

Hannah in VA






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Thanks to All... [200][1984]
posted by  ChittyChittyBangBrick  on Tue Dec 31 06:47 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.