Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

V6 -> turbo conversion wiring harness blues 700

uid 7214's pic
posted by  wynott on  Sat Aug 31 14:10 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I put a B230FT into my '87 780, which had a less than exciting V6. All the wiring is hooked up, with both new computers, and the turbo fuel pump. I had to do some splicing where the harness was different. Now I have no start. No spark. No fuel. I must have somthing not as it should be. Does anybody have any information regarding ignition/fuel injection computer pin assignments, and what their signal/output voltages/resistances should be? Any ideas as to why the system seems "dead" ?? I must be missing somthing painfully obvious. The engine, harness and computers came from an '87 740.

Thanks,

Ryan








<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.