Volvo RWD 140-160 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2003 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Advice for lower A-arm bushing replacement ... 140-160 1974

posted by  Kane on  Thu Aug 29 19:30 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Since I'm still dreading the replacement of the blower motor in the '86 ... well, tend to the other 3 first. :)

Anyways, the Haynes manual isn't very clear on the entire process. Will I need to remove the entire assembly and bench press (which I'll have to buy) the old out/new in? Or is it closer along the lines of replacing a 740 strut rod bushing? Perhaps somewhere in between that can be done with some washers, bolts, and all-thread rod?

Anything else I should caution for?

Thanks.

-- Kane
--
Blossom II - '91 745Ti/M46 ... Bubbles - '74 144GL/BW35 ... Buttercup - '86 245GL/AW70 ... The Wayback Machine - '64 P220/M40






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Advice for lower A-arm bushing replacement ... [140-160][1974]
posted by  Kane  on Thu Aug 29 19:30 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.