Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cruise control 200 1988

posted by  Rim on  Wed Aug 21 14:29 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I had a used cruise control put in my '88 240 and it is not working. For one, it loses 5 to 8 mph from the set point to the cruise. Secondly, it loses speed on any incline, and Third, the replacement switch, on the steering column,that includes the turn signal and dimmer switch will only works as high beam or low beam, it will not quick-flash on high to signal oncoming traffic or when you let a truck come in.

The local volvo guy says that is the way the 240 switch arm works. He says the 240's don't have a quick flash. Is that right?

Any ideas on either the cruise problem or the quick-flash of high beam would be appreciated.
Thanks,
Bob






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cruise control [200][1988]
posted by  Rim  on Wed Aug 21 14:29 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.