Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Can someone tell me if..... 200

posted by  Rick B. on  Sat Aug 3 12:55 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]


.....the fuel distributor (and air flow flap assembly) be removed without removing the intake manifold?

I've got the entire assembly separated from its mount on the side of the block and need to remove a couple more fuel lines and it seems like I should be able to twist it around and lift it up out of there. I would first try to remove the fuel inlet and return line up at the filter on the firewall and snake them out with the unit since it seems like those may be a bear to get to.

If someone knows for a fact that it can be done that would be great, and, if someone knows for a fact that it cannot, than that would save me the time of removing several fuel lines that look like they would be easier to get to if the intake was out of the way.

Anyway, anyone who has done this or have any experience in this area than I would appreciate any information that you may have especcially if it is first-hand

BTW the car is aa '81 240DL (none Turbo) (CIS injection).

Please help a poor (too poor to pay someone to do this) old (too old to be doing this) man.

Thanks

Rick B.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Can someone tell me if..... [200]
posted by  Rick B.  on Sat Aug 3 12:55 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.