Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing inner tie rods..Do it with steering rack installed or take it off the Volvo? 200 1993

posted by  raidman on  Mon Jun 24 16:14 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 4 22:17 CST 2014
[RELATED]

Bricksters:
I am replacing the inner tie rod ends and boots on the CAM Gear steering rack from my 93 245. Would it be easier to do these while the rack is on the car or to take the rack completely off and do the switch on a workbench?
Does anybody know about the "peening" of the flange in the innermost part of the rack? What to use to undo the peening and remove the inner tie rod?
Thanks for the help.
el Raidman.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacing inner tie rods..Do it with steering rack installed or take it off the Volvo? [200][1993]
posted by  raidman  on Mon Jun 24 16:14 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.