Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

O2 sensor removal 200 1991

posted by  drboyle on  Thu Jun 13 18:44 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 29 21:31 CST 2014
[RELATED]

Bricksters I'm attempting to remove the O2 sensor on my BRICK,I have the 7/8" deep socket with the "cut out" for the wiring. I've soaked it with PB blaster and gave it a go,no joy. I then soaked it with Aero Kroil and put an 18" 1/2" drive breaker bar to it, still no movement of the sensor. I can feel the socket starting to spread and the 2 of the corners on the sensor are starting to round off. I've done it with the exhaust hot and cold. I'm unable to get my air driven impact gun on the socket due to the angle that the sensor comes out of the pipe.What's next? Heat? Dennis






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New O2 sensor removal [200][1991]
posted by  drboyle  on Thu Jun 13 18:44 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.