Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

My timing's got the jitters 200

posted by  Bruce S. on  Fri Apr 12 15:52 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 4 19:05 CST 2014
[RELATED]

Hello all,

Here's the deal, I'm trying to solve a slight pinging under light load.

84 B23F auto Bosch dist. knock sensor has been changed (89 octane R\M+2)

(1) At idle the timing mark spends most of the time at 10 degrees BTDC, but jumps around from about 12 to 8 degrees BTDC.

(2) The timing advances to 38 or 40 degrees BTDC at 2000 rpm's, is this to much
to soon?

(3) Also the distributor is frozen into the block. Whats the fix for this?

Thanks for any help possible
--
Bruce S. near D.C.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New My timing's got the jitters [200]
posted by  Bruce S. subscriber  on Fri Apr 12 15:52 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.