Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Control arm bushings/ has anyone done it out there?,/ check out my sweet 245TI! 200 1984

posted by  josh on  Thu Jan 10 07:25 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 9 10:20 CST 2001
[RELATED]

I'm contemplating renewing the bushings on my control arms. This past weekend I replaced my control arms on this car and I reckon I could do the control arm bushing job too. I've got a 245 turbo. I'm thinking that I'll go to a junkyard and take the control arms off of another 240 and have the old bushing taken off and new ones installed then install the replacement control arms with new bushes on the 245..

Does this sound logical? Has anyone removed the bushes without a press? How should I proceed?

Anyhow I just got this really great '84 245ti, the PO did a b230 intake mod on it, rebuilt the engine, new harness etc. this weekend I did the air intake mod on it as per turbobricks.org, it is so nice, swallows up the kids and the dog.

Selling two 242ti's check them out at:

http://texasvolvoclub.com/volvoclassified.htm

Best Regards, Josh Lasserre







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Control arm bushings/ has anyone done it out there?,/ check out my sweet 245TI! [200][1984]
posted by  josh  on Thu Jan 10 07:25 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.