Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 1/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Attaching corroded license plate lights 200 82

posted by  someone claiming to be Neal Abramson on  Sat Dec 9 11:28 CST 2000 [RELATED]

If you find that you cannot re-attach your license plate light lenses after changing the bulb due to the spring thingy being corroded,do this;Use RTV to re-attach it to the hole.You will need a clamp to hold it till it dries but I find it works.The only thing is you will have to do this again when changing a bulb.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Attaching corroded license plate lights [200][82]
posted by  someone claiming to be Neal Abramson  on Sat Dec 9 11:28 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.