Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2009 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Radius Rod (Strut Rod) Bushings 700 1986

posted by  someone claiming to be JohnB on  Mon Sep 6 12:06 CST 1999 [RELATED]

The bolt that holds the sway bar link to the control rod is longer than the radius rod bushing bolt...I once used it to compress the bushing and then backed out the longer bolt and used the stock bolt.

But the stock bolt should be just long enough to get started if you make sure and get all the old rusted crap out from the strut hole before you put the new cone bushings in.

My 87 and 90 760 and 740T did not have to have front end alignment after replacing the cone bushings.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Re: Radius Rod (Strut Rod) Bushings [700][1986]
posted by  someone claiming to be JohnB  on Mon Sep 6 12:06 CST 1999 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.