Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

TRANSMISSION BEARING 700 '88

posted by  someone claiming to be LARRY SPOONER on  Thu Jul 5 10:09 CST 2001 [RELATED]

WHEN DRAINING THE 4 SPD WITH OD TRANSMISSION ON MY '88 740T AN APPROXIMATELY 6 MM BALL BEARING CAME OUT ALONG WITH THE OIL. THE TRANSMISSION IS NOT MAKE ANY UNUSUAL SOUNDS BUT I DO HAVE A DIFFICULT TIME SHIFTING INTO FIRST WHEN AT REST. THIS LOOKS LIKE A DETENT BEARING. IT HAS BEEN MY EXPERIENCE THAT DETENTS ARE INSTALLED FROM THE OUTSIDE. DOES ANYONE KNOW IF IT CAN BE REPLACED W/O TAKING THE TRANNY OUT OR DOING A REBUILD. THIS IS MY FIRST TIME IN THIS WEB SITE AND I AM VERY PLEASED AT THE WEALTH OF GREAT INFORMATION. GREAT JOB!!!! ALSO IS THERE A RELAY DIAGRAM FOR THE 740'S? I'M TRYING TO LOCATE THE HORN RELAY. (IF THERE IS ONE.)





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New TRANSMISSION BEARING [700]['88]
posted by  someone claiming to be LARRY SPOONER  on Thu Jul 5 10:09 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.