Well I will be putting on a T3 ball bearing turbo here in the next couple of weeks. Is there any helpful tips before I take it all apart. Things that I should replace while I am down there. My plans so far are to take the old exhaust manifold off with the turbo still attatched, or should I take the tubo off because it will be harder to take the turbo off of a loose manifold. Then port the exhaust manifold. Or at least get rid of the flashings that may be in there and clean it out. Put on the T3 ball bearing and get new vacuum lines. Is there anything I am missing. I have heard about cleaning out the oil lines. What is the best way for this. A friend that knows quite a bit about turbos will be helping me I hope. Thanks. Mike