Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

socket size to remove oil cooler pancake? 200 1983

posted by  someone claiming to be Bill D on  Sun Jan 28 12:10 CST 2001 [RELATED]

I want to remove a turbo's oil cooler and fit it onto my 1983 245. I need to know what size deep socket to get so I can remove the pancake fitting that the oil filter screws onto. Also I picked up a 5 bar gaugre and sender but I am not sure which connector is for the idiot light and which is the gauge? I assume the idiot light would have continutiy on a bench test but what ohms for the gauge connecter could it be very low as well?

Bill D.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New socket size to remove oil cooler pancake? [200][1983]
posted by  someone claiming to be Bill D  on Sun Jan 28 12:10 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.