Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2020 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Master Cylinder Bleeding 200 1981

posted by  81242DLB21FCA on  Sun Apr 2 20:18 CST 2023
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 22:26 CST 2014
[RELATED]

https://www.youtube.com/watch?v=oi4BnNA3Ep4

After a complete brake job (MC to pads including hoses) I could not get a firm peddle. Despite advice from you-all to bench bleed the MC, I didn’t. Found this youtube video on bleeding a MC in the car. I did a variation for our dual system connecting hoses from the two LF top bleeders to the reservoir. I was able to pump the peddle and watch for bubbles. Sure enough there were a couple. I then went around to each wheel following the Volvo procedure. BANG! I had a very firm peddle.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Master Cylinder Bleeding [200][1981]
posted by  81242DLB21FCA  on Sun Apr 2 20:18 CST 2023 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.