Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2020 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Obscure Question B21F Idle Speed Control 200

posted by  yellowbrickroadster on  Sat May 28 10:02 CST 2022
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 06:18 CST 2014
[RELATED]

I have a 1980 242 with B21F and K-Jet. The idle speed adjustment screw is the black plastic thumb wheel type thingy under the intake manifold, attached to the front side of the throttle body. Does this black plastic adjustment screw unscrew completely in order to be removed ? I picked up a spare throttle body at the pick-n-pull and wanted to remove the black plastic screw to check for cracks, clean everything up etc. Has anyone here ever taken apart this idle speed mechanism on this version of the throttle body and then reassembled with new gaskets, o-rings or whatever ?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Obscure Question B21F Idle Speed Control [200]
posted by  yellowbrickroadster  on Sat May 28 10:02 CST 2022 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.