Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2008 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1995 940 Front Hub Mitchell Manual Procedure 900

posted by  jd620 on  Wed Mar 16 09:50 CST 2022
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 07:42 CST 2014
[RELATED]

My daughter's 1995 940 was in a shop that supposedly used the procedure in a Mitchell manual to tighten the front wheel 36mm hub nuts. I could not get more information about the procedure from the shop. Chilton and Haynes manuals say to tighten the nut to 74 ft-lbs and then angle tighten 45 degrees. Also, the Chilton and Haynes manuals say not to re-use the 36mm nut. The shop did re-use the nut!
I could not find anything, much less a Mitchell manual, that gave the procedure written in the Mitchell manual.
Any help with the Mitchell manual procedure tightening the front hub nuts would be appreciated and I'd sleep better knowing it was done correctly or if she should take the car to a shop that could do it correctly.
Also, does anyone have the part number of the 36mm nut used on 940s?
--
Mine:3-940s running; 1-740, 2-940 parts; dtrs:4-940s running






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1995 940 Front Hub Mitchell Manual Procedure [900]
posted by  jd620  on Wed Mar 16 09:50 CST 2022 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.