Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Starter issue 200 1991

posted by  TBE on  Sat Mar 27 14:08 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Nov 10 07:40 CST 2012
[RELATED]

Currently, my starter wont crank. I put a jumper from the battery + side to terminal 50 and nothing happened. I've got 12v on terminal 30. From what I've read on related posts, I need a new starter. But, I may have another problem.

I took apart and cleaned the neutral safety switch. What seems odd are the voltage readings on the wire that goes to terminal 50. In switch position II, I get 12v when the shifter is in P and N and 0v in the other positions - is this correct? I also get 12v in position III (start) when in P and N - this makes sense. I would think the voltage would be zero in position II in P and N. Do I have multiple issues here?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Starter issue [200][1991]
posted by  TBE  on Sat Mar 27 14:08 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.