Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2006 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Stripping ‘64 1800 to send out for body work, I’ve arrived at removing the electrics... 1800 1964

posted by  jgcoutts on  Sun Mar 7 22:55 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

...and discovered after removing the ignition and coil and moving on to the wiper switch that something was not right with the schematics. Now having read Ron’s lengthy articles on this matter I’ve got serious trepidation about how reinstalling a new harness is going to go. I plan to now tag all the loose connectors, photograph the begezus out of it and pray the loom from CVI is a match.

As it will be months before the car is back I plan to leave connected or reconnect all the gauges and switches once the dashboard is out and pull the old loom from the engine compartment and rear of the car into the passenger compartment then bag and tag it.

Does this seem sensible, doable, insane?

Any advice would be appreciated.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Stripping ‘64 1800 to send out for body work, I’ve arrived at removing the electrics... [1800][1964]
posted by  jgcoutts  on Sun Mar 7 22:55 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.