Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

b230ft Valve stem seals... only on intake valves?

posted by  Will740turbo on  Fri Jan 1 21:08 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 16:09 CST 2014
[RELATED]

Almost done with this rebuild!

I kept looking at the valve stem seals that were installed - all 8 of them, and they didn't look new. I am just installing the valves after lapping them, and I decided to pull one off. Good gracious, definitely old and nasty.

I see several notes that only the intake valves have seals... um. Ok. But my exhaust valves had seals on them. Are the intake valves really the only ones that get seals? The engine rebuild manual says nothing about valve stem seals :eyeroll:

Cheers!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New b230ft Valve stem seals... only on intake valves?
posted by  Will740turbo subscriber  on Fri Jan 1 21:08 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.