Volvo RWD S90-V90 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 S90-V90 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Will Reinserting Dipstick Cause New Cam Seals to Blow? S90-V90 1998

posted by  HerrGruyere on  Mon Mar 30 17:13 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

‘98 V90 here! And hello again!

I replaced the PCV system and the front cam seals about a half year ago. Ever since, I’ve been running with the dipstick popped for fear that the seals would blow. As far as I knew, the old seals were original. I still get smoke out the dipstick, but oil is starting to blow out of it causing a mess.

My thing is this: if I’m still getting smoke out the dipstick hole when the stick it out, would putting it back in cause the engine to over pressure and pop the cam seals? I’d really rather not do them again (easy but time consuming) and I also don’t want an oil soaked engine.

Any thoughts? Thanks in advance!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Will Reinserting Dipstick Cause New Cam Seals to Blow? [S90-V90][1998]
posted by  HerrGruyere  on Mon Mar 30 17:13 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.