Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2024 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B21 head on B230 block? 200

posted by  HillBilly on  Mon Jan 27 23:59 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 16 08:26 CST 2014
[RELATED]

I've got a good, complete B21f head with cam and a good., complete b230 crankcase.....block, pistons, oil pump, crankshaft, distributor...I want to build a good engine for a 1976 model 242. The body is great. I'm wanting to use existing parts that I have to put this together. All of the parts that I have are within factory spec. I want to use the b21f head so that I can use the CI fuel injection that is presently on the 76 model 242 if I can use the b21f head on the B230 block. My daughter melted a piston on the original b21 engine, but the head is Ok.....I had it checked. I know that the cylinder bore is slightly larger on the b230, but I figure a b230 head gasket should work ok. Any comment or advice? Thanks Steve.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 B21 head on B230 block? [200]
posted by  HillBilly  on Mon Jan 27 23:59 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.