Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Front end alignment/tie rod ends... 200 1993

uid 33936's pic
posted by  TheBrickTank on  Thu Dec 12 07:23 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:54 CST 2014
[RELATED]

All,

I'm once again about to start work on my 1993 245.

In doing so I want to get the steering wheel where it should be as the PO must have replaced both tie rod ends or the steering rack, can't tell, and any ways the steering wheel is off 90 degrees, not to mention that one outside tie rod is barely on while the other one is on almost all the way on thread wise.

I've replaced outside tie rods before, and I can't remember how many turns it was to get the off so that I could get them close when putting them back on, so that is my question. Does anyone have a number of turns that will get me close to being straight? I'll get a front end alignment after that, just like to get the steering wheel close for now.

Thanks in advance,

matt
--
1989 - 245, 1990 - 245, 1991 - 245, and 1993 - 245






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front end alignment/tie rod ends... [200][1993]
posted by  TheBrickTank  on Thu Dec 12 07:23 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.