Volvo RWD 140-160 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2023 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1972 142 S rust question 140-160

posted by  lyonsfin1 on  Sun Nov 10 11:14 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun May 15 19:43 CST 2011
[RELATED]

My wife fell in love with an original (except paint) 142s. The car looks to be a good driver with some rust (previously repaired, I think, popping out in the end of the rockers. Minimal bondo found and inner rockers seems very solid as are the floors and jack points.
My question is in regard to the rear wheel wells. On both sides there is rust through behind the tires into the trunk area. Just sheet metal The driver's side is a bit more serious than the passenger side as the rust is on the sheet metal down to the "frame rail" where the shock attaches. Frame rail appears to be very solid and no sags, etc. Can I repair the wheel well sheet metal if the frame rail and support area is OK or does the rail need to be cut out for the repair?

Unfortunately I cannot attach an image






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 1972 142 S rust question [140-160]
posted by  lyonsfin1  on Sun Nov 10 11:14 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.